Laboratory & Field Products
The GMS1800b Laboratory Counter is a microprocessor based unit which may be used with many common types of Geiger or Scintillator radiation detectors. Measurement results are displayed on a large back-lit LCD display.
The GMS1800a Dual Channel Laboratory Counter is a microprocessor based unit which may be used to count digital pulse signals over a range of user selectable counting periods. It is a compact and robust unit suitable for laboratory or field use.
Electron Spin Resonance (ESR)
Extend your lab’s capabilities with the benchtop EPR/ESR spectrometers. The versatile MS-5000 and MS-5000X are research grade instruments with sensitivity and reliability for demanding applications.
Compact Single-Channel Analyzers (SCA)
bPAD is a compact microcontroller-based Intelligent Single Channel Analyzer. The device contains a Preamplifier-Amplifier-Discriminator with TTL digital output.
The bPAD+ is an enhanced version of the bPAD SCA This device adds an extra analog pulse output, which can be connected to an external MCA for monitoring purposes.
The bPAD+ VR is an enhanced version of the bPAD+ SCA. This model's analog output can be setup to use the pulse signal or a variable voltage level relative to the discriminated count rate.
The first of BrightSpec's Compact Digital Multi-Channel Analyzer series, this MCA is designed to be used with scintillation detectors, this MCA is built into the tube socket, taking very little space.
A special version of the bMCA (USB or Ethernet), where the tube socket has been replaced by a single SHV connector. It works for a wide range of detectors supplied with a single connector carrying the signal and high voltage supply.
This is the Ethernet version of the bMCA. Using an Ethernet connection instead of USB allows installing the device in remote places. Data transfer rates are also tremendously improved.
Compact Digital Multi-Channel Analyzers (MCA)
Topaz-Pico is a compact, stand-alone digital Multi-Channel Analyzer (MCA), which is able to perform Pulse Height Analysis (PHA) of the signal produced by a standard scintillation detector such as NaI(Tl), LaBr3 (Ce), LaCl3(Ce), etc.
Topaz-X is a compact, stand-alone digital Multi-Channel Analyzer (MCA), which is able to perform Pulse Height Analysis (PHA) of the signal produced by high resolution, Peltier-cooled semiconductor detectors, such as Silicon Drift Detectors (SDD) and Si-PIN diodes.
The Topaz-Pico BNC is a special version of the compact Topaz-Pico Multi-Channel Analyzer, where the Lemo connectors have been replaced by standard BNC connectors.
Introduced March 2018, Topaz-HR is a compact stand-alone MCA for high-resolution detectors such as Hyper Pure Germanium Detectors (HP-Ge).
A portable spectrofluorimeter for non-invasive analysis of cultural heritage artworks using LED sources. The LEDµSF is essential to answer critical questions during the scientific analysis of materials in artwork.
Serving the External Dosimetry, Radiation Detection, and Spectroscopy communities since 2012.
Designed by Rotunda Scientific Technologies™ LLC © 2012-2019