The TOPAZ-Pico BNC is a special version of the compact Topaz-Pico Multi-Channel Analyzer, where the Lemo connectors have been replaced by standard BNC ones.
TOPAZ-Pico is a compact, stand-alone digital Multi-Channel Analyzer (MCA), which is able to perform Pulse Height Analysis (PHA) of the signal produced by a standard scintillation detector such as NaI(Tl), LaBr3 (Ce), LaCl3(Ce), etc.
The device is therefore useful for obtaining the energy spectrum from the photon radiation detected by the scintillator, and can be easily interfaced to a typical PC or notebook via a standard USB port for further data transfer and analysis.
The MCA is provided with a basic software package that allows to control the device, and to acquire and visualize the energy spectrum. The software incorporates an advanced and easy-to-use “discovery” function that can be used to detect automatically all the BrightSpec MCAs (bMCAs-USB, bMCA-Ethernet and TOPAZ-Pico) in the neighborhood of the PC that are available for connection.
A set of programming libraries is also offered, which makes the incorporation of the TOPAZ-Pico into existing radiation systems or setups very easy. The programming libraries are available for both MS Windows and Linux operating systems.
The device is available either in a rugged, pocket-size aluminum box with input and output connectors or as separate Printed-Circuit Board (PCB) for OEM distribution.
The TOPAZ-Pico BNC is an advanced, fully digital, compact Multi-Channel Analyzer. This device is used to process the electronic pulses produced by a photo-multiplier that is coupled to a scintillator detector. Such detectors are commonly used in the detection of gamma-ray radiation due to their high detection efficiency, medium energy resolution and relatively low price. This kind of MCA is able to produce an energy spectrum from the radiation events detected by the scintillator, storing it in the device’s memory for further retrieval and analysis by the PC.
The MCA implements two modes of data acquisition:
PHA mode is regularly used in nuclear spectrometry and radiometry, while MCS is a very useful feature for following photon detections in a particular specific energy regions in function of time. MCS acquisition mode is useful to both laboratory and industrial applications that make use of radioactive sources or seek for radioactive materials.
The TOPAZ-Pico design makes use of the latest advances in digital electronics. The MCA utilizes powerful digital pro- cessing techniques and algorithms to better separate the useful signal from noise and to maximize performance under high count rate conditions. It also contains a miniaturized high-voltage power supply optimized for low consumption that provides the necessary power for the PMT tube, including those used with large scintillator detectors. The device has a spectral memory size of up to 4096 channels and can perform MCS in addition to PHA.
The device is cased into a rugged aluminum box of pocket sizes with one input connector (detector signal together with high voltage) and output\control connector (USB mini type B). Optionally, the MCA can have an extra input connection for TTL signal count, quite useful to connect the input of a neutron counter.
This device is also available as a separate PCB only, which makes it attractive to the OEM market. The programming libraries for Windows and Linux OS are available as well.
A basic acquisition software package is provided for managing such device operations as setup, control, data acquisition and visualization.
PHA Acquisition Mode
MCS Acquisition Mode
High Voltage Power Supply
ESR5000 Benchtop ESR / EPR Spectrometer (Formerly MS-5000)
microESR Benchtop ESR / EPR Spectrometer
Lexsyg Research Imaging TL-OSL-RF System
Lexsyg Smart TL / OSL Reader
LEDµSF Portable Spectrofluorometer